ContactivityDocs
NumbersMarkdown

Route a number

Routing decides where inbound calls to a number go. A new number is Not routed until you set it.

Set routing

  1. Go to Numbers.
  2. Open an active number's ⋮ menu and select Edit routing.
  3. Pick a destination under Send calls to.
  4. Select Save routing.

The change applies to new inbound calls within a second.

Destinations

Option Calls go to
Not routed Nowhere. Calls are not answered.
SIP trunk A trunk in this project (see SIP trunks).
Forward to a phone number One of your numbers, or Other number…. Both legs are billed: the inbound leg, and the outbound leg at the destination's rate. A forward to another Contactivity number stays on our network and its leg is billed at the SIP & app rate.
SIP URI A SIP address, for example sip:pbx@sip.example.com.
CoXML app A voice app that answers with CoXML instructions.
Call Control app A voice app you control through webhooks and the API.
Flow A flow built in the flow editor.
PBX app (IVR / ring group / voicemail) A PBX app.

See Voice apps to create apps.

Options

  • Ring timeout (s): how long the destination rings. Default 30, from 5 to 600.
  • Record calls to this number: records inbound calls. Recordings appear under Voice > Recordings. Not offered for CoXML app and Call Control app: those apps record with <Record> or the record_start action.

The Routing column on the Numbers page shows the current destination, and a recorded badge when recording is on.

Fallbacks

Fallback destinations and traffic splits are set through the API. See the routes guide on the developer site.