# Route a number

Routing decides where inbound calls to a number go. A new number is **Not routed** until you set it.

## Set routing

1. Go to **Numbers**.
2. Open an active number's ⋮ menu and select **Edit routing**.
3. Pick a destination under **Send calls to**.
4. Select **Save routing**.

The change applies to new inbound calls within a second.

## Destinations

| Option | Calls go to |
|---|---|
| **Not routed** | Nowhere. Calls are not answered. |
| **SIP trunk** | A trunk in this project (see [sip-trunks.md](/md/sip-trunks.md)). |
| **Forward to a phone number** | One of your numbers, or **Other number…**. Both legs are billed: the inbound leg, and the outbound leg at the destination's rate. A forward to another Contactivity number stays on our network and its leg is billed at the **SIP & app** rate. |
| **SIP URI** | A SIP address, for example `sip:pbx@sip.example.com`. |
| **CoXML app** | A voice app that answers with CoXML instructions. |
| **Call Control app** | A voice app you control through webhooks and the API. |
| **Flow** | A flow built in the flow editor. |
| **PBX app (IVR / ring group / voicemail)** | A PBX app. |

See [voice-apps.md](/md/voice-apps.md) to create apps.

## Options

- **Ring timeout (s)**: how long the destination rings. Default 30, from 5 to 600.
- **Record calls to this number**: records inbound calls. Recordings appear under **Voice > Recordings**. Not offered for **CoXML app** and **Call Control app**: those apps record with `<Record>` or the `record_start` action.

The **Routing** column on the Numbers page shows the current destination, and a **recorded** badge when recording is on.

## Fallbacks

Fallback destinations and traffic splits are set through the API. See the routes guide on the developer site.
