# SIP trunks

A SIP trunk connects your phone system, PBX or SIP devices to Contactivity. Use it to make calls to phone numbers and to receive calls on your numbers.

SIP trunks are under **Voice > SIP Trunks**.

## Create a trunk

1. Select **Create trunk**.
2. Enter a **Name**.
3. Pick the **Authentication** type. It cannot be changed later.
4. Set the options below and save.

| Authentication | Use when |
|---|---|
| **Registration (SIP username + password)** | Your devices register with a username and password. |
| **IP allow-list** | Your system sends calls from fixed public IP addresses. |
| **Host (we send calls to your hosts)** | We send inbound calls to your servers. Enter **Hosts**, one per line, as `host` or `host:port`. Hosts are tried in order. |

## Trunk options

- **Default caller ID**: **From your equipment**, or one of your numbers. See [caller-id-rules.md](/md/caller-id-rules.md).
- **Ring strategy** (Registration trunks): how inbound calls ring your devices. See [sip-credentials.md](/md/sip-credentials.md).
- **Record calls on this trunk**: records calls on the trunk.

## SIP domain

Your SIP domain is in **Settings > General** under **SIP domain**. Register your devices against this host. All projects in your organization share it.

## Receive calls

Route a number to the trunk. See [route-a-number.md](/md/route-a-number.md).

## Limits

Calls per second and concurrent calls are account limits, set by your tier. Calls over the limit are refused. See [account-tiers.md](/md/account-tiers.md).

## Archive a trunk

Select the trunk and archive it. An archived trunk stops working, with its credentials and allowed addresses. This cannot be undone. A trunk that a number routes to cannot be archived. Change the number's routing first.
